Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They do not decay or rust as timber and aluminum.

Regularly cleaning and lubricating UPVC windows and upvc repair doors is crucial. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace and generally fit into old frames very easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case you'll need find some plastic spacers to aid the new pane in being able to fit perfectly into the frame of the window.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not on the floor which could cause them to be trampled under.

Once the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and repair the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap is particularly large, you may be interested in a security door that has an integrated window, UPVC repair as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. In time, they could be affected by a variety of issues such as sliding. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from becoming worse.

Repositioning the hinges can aid in fixing a window which is sliding. To do this, you'll need to open the window so that you can get to the frame. After that, using the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to secure them in place.

If you are unable to move the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loose their elasticity. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. The majority of the time it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. The first step is to close the window and then perform an initial test to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how serious the problem is, the old caulking may need to be removed. When it comes to uPVC repair, you must avoid over-caulking. This will only make your window harder to clean and lower its energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leak originates from the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with a breeze it could be hinges that are at fault. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. It is an easy procedure, but it is easier to do when you have a person to help hold the frame up.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. You can do this by looking for the arrows on each hinge. This shows which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window replacement near me in a certain way or due to inadequate installation at the factory. Sending us photos via our website will often resolve the problem. We are happy to give advice.

It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal way to do this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your upvc repairs window.

5. Draughts

Draughts in Upvc windows can be caused by different things. Firstly the hinges, again because of wear and tear, can become misaligned, this can cause an opening to appear where the sash joins the frame. They can be fixed by giving them a thorough clean, however when they're beyond repair, it might be necessary to get them aligned or replaced. Second, the interlock can also become unbalanced. This happens on the hinge's side and could require to be cleaned. In some instances, it may be necessary to replace them.

The next common reason for draughts are the window seals, these can become worn down or damaged over time, and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures and decrease the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler that can be placed over your window sill. They will keep your home warm by blocking out cold air.

With a little regular maintenance and repair, your upvc windows will provide excellent insulation and security for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it may be more cost-effective to replace them rather than repair them. If you are experiencing issues with your Upvc window it is recommended to speak with a professional as soon as you can.