Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to decay or rust as aluminum and timber.

It is essential to clean and oil UPVC doors and windows regularly. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good condition.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. However when windows with double panes are held in place by internal beading, it will be more difficult to remove the old panes and put in new ones. In this situation you'll need to source some plastic spacers that will aid the new pane in being able to fit properly into the window frame.

If you are going attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also a good idea to lay down a dropcloth before you start working on the glass so that any fragments of glass fall onto the cloth rather than on the floor where they can be trodden under and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional is able to come out and repair the window. It also acts as an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window as it will provide the best of both worlds.

2. Sagging

upvc Window repair is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time they can suffer from a variety of issues, including sagging. A sagging uPVC window could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll need open the window to access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and Upvc Window repair adjust them counter-clockwise or clockwise. Close your window to check the fit after you've moved your hinges. If you're satisfied with the fit, tighten the screws to ensure that they remain in place.

If you are unable to reposition the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and draught-proof.

UPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it can be due to the mechanism of the handle wears out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and do an initial fitting. The corner joints of the sash should align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's crucial to take action. Water leaks from windows not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on how severe the issue is, old caulking may have to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and can reduce your energy efficiency.

Check that any drainage holes have no debris inside them and that the sill pan has been angled correctly to drain away from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open in a breeze, it may be hinges that are at the fault. They can be repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Like all mechanical parts hinges will wear out over time. The process of replacing a hinge on a window is essentially a simple process, but it's easier when you have a person to help you hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused either by opening the window incorrectly or a faulty installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be pleased to offer you suggestions.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also reduce the possibility of a window sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges may also become unbalanced due to wear, causing a gap where the sash and frame meet. They can be fixed by giving them a good cleaning, but if they are beyond repair it might be necessary to have them re-aligned or replaced. The interlock, which is located on the hinge side of the window, may also be misaligned, and again it's possible to give them a clean but in some cases it might be necessary to get them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and again will lessen the risk of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. These will keep your home warm by blocking cold air.

The windows made of upvc can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it may be more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your upvc window you should consult a professional as soon as you can.